Here is where we need to raise another limitation. Yet another impact of running on relatively low power is the fact that for most inflatables you cannot have both the bubble system and the heating system operating at the same time. So when you are enjoying the bubbles and the water starts to get cold your going to have to turn off the bubbles before you can turn on the heater.
Almost everyone we know is familiar with the Coleman name – they have been market dominators in sporting, outdoor and recreational products for many years. Since they have been around for so long, consumers know the can trust the Coleman Company for ease of use, sturdy construction, long-lasting in each and every one of their products and inflatable hot tubs are no exception.
The walls are made with six-layer reinforced PVC designed to resist tears and leaking, and the inside supports 108 relaxing air jets for soothing hydrotherapy and pain relief. The spa also features a built-in heater for more convenient design, and features an LED control panel close at hand that makes it easy to activate the jets or manage the temperature inside the spa.

With an inflatable spa, all you need is order them online and wait for their delivery. Once delivered, you just need to open the box and get it set up in less than an hour. Even a single person can do it. The only preparation you need before inflating it is to make sure that the location leveled and is free of debris and that a standard outlet is nearby.
Our only concern was that we found no inflatable hot tubs with built-in seats. Now, there is a good reason for this, mainly because you don’t need them. It is very comfortable to sit in, but a little strange at first if you are used to having seats in your hot tubs or spa. The others reason being an inflating issue. If seats were part of the tub, they might be a weak spot and susceptible to stress tears. Also, less water is needed, which is more cost effective in maintenance costs.
That's what these inflatable hot tubs offer you. They come to you deflated, almost mysterious in their packaging. You unwrap and inflate them anywhere you have electricity. Fill them with pure water and turn them on. The electrical current warms up a heating element kept in a separate filtration compartment through which the water gradually circulates.

This plug and play inflatable spa has one of the easiest setups possible, demanding that you spend just a few minutes during the process. At the same time, it requires no plumbing whatsoever, mostly due to its ingenious thermal systems. Speaking of which, the tub has solid-state thermic controls which enable you to control the temperature of the water in great detail along with the tub’s many other features.
Unlike traditional spas, inflatable models do not experience many leaks or blockages of tubing. Due to the PVC material, sealing is much easier than with fibreglass and makes these issues less likely to take place. Inflatable tubs are also very simple to access for maintenance, so you will not need to cut or remove any parts of your home in order to get to the area that needs attention.
The Intex 85in PureSpa Tub delivers everything normal hot tubs provide in a more convenient, space-saving package. Large enough to hold six people comfortably, the tub is the perfect option when you want a fun place for guests and family members to socialize. The tub comes with individual massage jets and a hard-water softening system to keep the water clean and comfortable while in use.
The two most common customer complaints seem to be that the water takes a long time to heat and that the temperature drops quickly when the bubbles are turned on. Not wanting to be too negative, the number of these complaints is relatively small and many more customers seemed overjoyed with their purchase. Just be aware that the spa may take longer to heat up initially, once heated, maintaining the right temperature is achievable by using the thermostat.
Slow To Heat – These have electric heaters and not gas like the in ground or acrylic may have. The rule of thumb is to expect about one hour wait time for every 2 to 3 degree rise in temperature. So if you don’t plan to keep it on all week, start heating it up Saturday morning or Friday night for the weekend. But this is also a money saver since these spas need much less water and have awesome insulation you could keep it heated at all times for pennies more. Or be a diligent saver and only heat it up when you know you want to use it. Just give yourself some head-start time.
×