Backyard Flexibility. Keeping your pool and your spa entirely separate allows for more flexibility in the design of your backyard oasis. For example, your spa can be located on or in your deck, while your pool lies down a garden path from your deck’s stairs. Your children can play in the pool while you relax in the hot tub, enjoying your calm retreat.
Once the set is fully inflated, you have to fill it in on your own, making use of a garden hose for example. When the tub is ready to use, you can adjust how much hot you want the water to be and for how long you want it to keep heating. The same goes for the jet heads functioning, all can be adjusted and timed by digital controlling. The main difference between the system of an inflatable and a traditional hot tub is the disposition of the motor/engine that filters, heats and blows water and air. On traditional tubs it will be placed built-in, while on the inflatable one it is a sided appliance.
There is a timer function so that you can set the heater to come on when you need it to. The filtration system will keep the water clear along with the salt chlorination system which will keep it safe. The tub is comfortable to sit in and all of the controls are easy to reach from inside. As well as the 8 water jets there are 120 bubble jets around the base of the tub so you can choose what type of water massage that you want to use at the press of a button. Check out the pros and cons below.
Tips- to save time (if your able) disconnect the hot water from washer and connect a hose. Run it to the spa and fill with hot water. Turn the water heater to highest setting. When hot water runs out, wait a half hour for the water heater to recover and do it again. Repeat until spa is filled. It will be about 97 degrees. The spa will now only take 3 or 4 hours to get to 104 this way.

One thing to note about the Bestway Miami is that, unlike other inflatable hot tubs in this list, the Miami has bubble jets around only three quarters of the inside cirumference. This means there is a section inside the hot tub where there are no direct bubbles. You still get water swirling around you. Just no direct contact with the bubble jets. On the upside, some customers say this is a good thing. Having a section with no direct bubbles caters for those that don't like bubbles, or can give you a break from them without getting out.
Also factor in the mechanical portion and that the parts inside serve a bigger role when in use, so are usually multi-mechanical beasts that have a lot of expensive internals. The more internal moving parts you have, the more expensive the product is, regardless of its origin. It should be noted that although most portable hot tubs end up in the medium to high price point, inflatable hot tubs are not that much cheaper than the bulk of portable hot tubs if you remove shipping costs.

The 28409E PureSpa Plus Bubble Spa is perfect for use both indoors and outdoors. It features the I-Beam technology, and the tub is made of 3-ply laminated PVC. It boasts a generous 6 person seating capacity. The 290-gallon water capacity and the 460 gallons per hour flow rate show that this is a high-end tub that delivers nothing but quality to those who use it.
In-ground or custom styles are usually referred to as spas. They can be attached or adjacent to an in-ground swimming pool and are often placed near each other as a warm water and cold plunge-type of therapeutic experience. Others are stand-alone hot tubs, but set into the ground or custom built. Some are sturdy portable models (not inflatable) from top manufacturers that are installed to look like they are custom-built in-ground models that can be positioned upon a raised platform, sometimes under a pergola or a gazebo. Others actually are custom built and constructed of the same materials that pools are made of, like concrete, fiberglass, or gunite, along with stainless steel, tile, or copper.
All inflatable spas include a locking top cover for safety reasons. Some, however, also use the cover to insulate the tub and speed up the heating process. Some models include inflatable covers that fit into the top of the tub like a stopper in a bottle, while others use insulating materials like foam or foil lining to keep the heat inside. Regardless of insulation style, you’ll want a cover that’s more than a fitted piece of fabric.
Usually costing around $4,000 to $9,000 depending on type and size and location to be installed. But going the inflatable spa way will run you around $500, with no setup costs. And if you will only be using it part of the year, you simply deflate it and store it away. There are no costs of maintaining it to keep it from looking like something that the creature from the black lagoon would like to hide out in. Oh, and did we mention, to heat it up and keep it heated will run around $8-$12 a month depending on your electricity prices per kWh.
×