The pump has an air blower, which provides air for the tub’s 120 bubble jets. The air blower can also be used to inflate the tub during setup, and it includes a pressure gauge to help you avoid overinflating the tub. The valves built into the tub should let you inflate it easily, and they prevent air from escaping when you disconnect the hose. A specialized tightening wrench is included in the package, which lets you tighten the valve setting to prevent growing leaks over time.
The maintenance of inflatable hot tubs should be a breeze, right? Keep the filters in good condition by removing and rinsing them every few days or so, depending on how much it has been used. Another downside is the location filters. Some models place the filters inside the heater or pump for easy access, while others put it along the bottom inner portion of the tub. This makes cleaning and changing it a more demanding task.
Electrical rate: Is very unlike to see inflatable tubs with 220V systems, because they will not heat water over 104ºF, and the filtering and blowing systems don’t require a lot of potency. The 110V compatibility is unanimous so, while that doesn’t mean you cannot implement it on your 220V household system, you will need a transformer to make it work.
They don’t usually use real water jets, but instead use fans to “blow” the air around (also because of the 120 volt outlet), which causes them to cool down much faster than a regular hot tub. This cooling effect is only made worse by the fact that the materials they are made from lose heat much faster than the materials used on a regular hot tub. All in all, you aren’t likely to get more than 15 minutes to a half an hour of good heat out of an inflatable hot tub.
×