The Pump in the AirJet is designed at such a place that it becomes easier for you to reach it while still in the tub so that you will not have to be interrupted in the middle. The pump actually has a Heater combined with it to serve Warm Water without making any of extra sound. So as the pump is placed near to you, it was necessary for them to take care of the noise made by the pump and believe me when I say pump makes the least noise possible giving you the best experience.
If you are looking for an affordable and feature-rich inflatable hot tub, the Coleman Lay Z Spa could be a good choice. Made of durable fabric-coated cover, it is a resilient option with a cushioned floor for added comfort. The drain valve is conveniently placed and the tub has luxury features such as the Lay-Z massage feature, which is an added advantage. With the well-reputed Coleman name, you can be assured of a durable product. The integrated filter also helps to maintain the cleanliness of the tub.
Inflatables use a 120V electrical outlet. Unfortunately, this translates to a drastically reduced heating power when compared to the hard-side hot tubs. But this should not necessarily be viewed as an issue considering the fact that the water in them can reach quite high temperatures if you do not cheap out and invest in one of the better models on the market. For example, the top of the line SaluSpa Hawaii HydroJet Pro can even reach up to 104 degrees Fahrenheit, a water temperature that should suffice regardless of your preference.
Materials: While most models make use of the same kind of fabric formula, you must check carefully how the fabric works for the set. How many layers? Does it work with a chamber system? It is water proof? Easy to clean? The outer fabric is soft or rigid? The materials used for the inner part and the outer part are often quite different and you have to be likewise careful to do not pick models that have a way too soft plastic for the pool/inner part.
All inflatable spas include a locking top cover for safety reasons. Some, however, also use the cover to insulate the tub and speed up the heating process. Some models include inflatable covers that fit into the top of the tub like a stopper in a bottle, while others use insulating materials like foam or foil lining to keep the heat inside. Regardless of insulation style, you’ll want a cover that’s more than a fitted piece of fabric.
The maximum heat capacity is 104°F, and it uses 120 bubble jets and 4 massage jets to provide an amazing hydro massage. It boasts an impressive 210-gallon water capacity, and it has a flow rate of 460 gallons per hour. It heats the water by 2-3°F per hour. The important features are the easy-to-use digital control panel, the water filtration system, the hard water treatment system, the salt water system, and the comfortably cushioned floor.
If you do like to move it around regularly, which is the strongest advantage for inflatable hot tubs, you have to deal with draining, deflating, moving, inflating, and refilling your tub every time you want to move it. The deflating and inflating isn’t as big of a deal if you have an air compressor to hook up to it, or if your hot tub came with its own, but it still takes a while (and a good deal of water) to refill that hot tub every time, and longer yet to get the water hot.