Most of an inflatable hot tub system is automated, except for the water filling the set up of the tub pool. You have to find a special place where the tub can stay even on the floor, preferentially with a thermal insulating material, like wood surfaces or even on your lawn. To guarantee it will be well insulated, there is a floor cover that is included in the pack and must be laid before you set the tub parts to be inflated.All the inflation process happens through and automated pump. You just need to connect the tubes and turn it on. Often the inflatable hot tub is made of two parts: the bottom/outer part and the inner/pool side of the set. They both inflate at the same time but are just assembled together with a zipper or other kind of tying system – and this is really great for insulation and safety reasons.

. Although it's a company that has been around since the 1950s, when it started making pumps that could be submerged in bathtubs, people often use the word to describe a spa or hot tub, even if it's another brand. All describe a large tub that is used for relaxation, hydrotherapy, warmth, and entertaining. All are equipped with built-in jets for targeting bathers' sore muscles. 
They don’t usually use real water jets, but instead use fans to “blow” the air around (also because of the 120 volt outlet), which causes them to cool down much faster than a regular hot tub. This cooling effect is only made worse by the fact that the materials they are made from lose heat much faster than the materials used on a regular hot tub. All in all, you aren’t likely to get more than 15 minutes to a half an hour of good heat out of an inflatable hot tub.
×