Unlike traditional spas, inflatable models do not experience many leaks or blockages of tubing. Due to the PVC material, sealing is much easier than with fibreglass and makes these issues less likely to take place. Inflatable tubs are also very simple to access for maintenance, so you will not need to cut or remove any parts of your home in order to get to the area that needs attention.

To empty is pretty easy, you fasten your stopper caps to the valves on the inside of the spa, this will stop the water from escaping. Now remove the pump by loosening the connectors and attach a cap to outlet A. (These caps come with hot tub) Fix the hose adapter to your garden hose and attach both to connector B, make sure that the other end of your hose is at the drain then remove the lower cap from the inside of the spa. Once it’s empty make sure you dry it properly before you pack it away.


With this jet massage spa set, you can pamper yourself in relaxing heated water while being surrounded on all sides by soothing bubble jets. Needless to say, you shouldn’t normally expect this type of treatment from standard inflatable hot tubs, especially the ones in the low-end of the market as far as price goes. Also, this inflatable hot tub features easy-to-use controls designed to facilitate full-control over the tub’s many features with minimal effort.

Is important to make clear here a fact about the Lay-Z-Spa series. It is a sub-brand of the British Bestway company, and their tubs sold and manufactured under this name are all British. When you see then being sold in dollars in America you are seeing imported products the brand is retailing abroad. Coleman is a brand chosen by Bestway to manufacture some of the Lay-Z-Spa series models in America, often exclusive here, which is the case of this inflatable hot tub. The Coleman’s Lay-Z 90363E  follows the formula of the Palm Springs model, it has a 77-inch diameter, is 28-inch tall and support up to 254 gallons of water. Up to 6 people can fit comfortably, and it comes with a heating system up to 104ºF and a standard two-cartridge filter. Like all previous models, it includes the pump to set up the tub, which will take less than 20 minutes, the electrical rate is 110-120V and the set of jets is also the bubble-only patch of 120 jets.
The 28409E PureSpa Plus Bubble Spa is perfect for use both indoors and outdoors. It features the I-Beam technology, and the tub is made of 3-ply laminated PVC. It boasts a generous 6 person seating capacity. The 290-gallon water capacity and the 460 gallons per hour flow rate show that this is a high-end tub that delivers nothing but quality to those who use it.
With a rich tradition of tubs that are manufactured in the United States with cutting-edge technology and affordability, the Coleman brand is recognized as a powerful brand people can trust. The innovation of this brand provides a remarkable 75% retention rating, meaning people will opt for Coleman over a competing brand. That is why 87% of Coleman owners will strongly recommend the brand to others. And no to surprise, their products come with features that provide an eco-friendly purification system, exclusive upgrades and cost-saving technologies.

Cleaning the filter cartridges must happen weekly if you are using the tub on a daily basis. You can use hot water and dish soap to remove deposits and bleach to sanitize it properly. Rinse and wash it very well before placing it back. Some people will let it sit on a solution with bleach and water for a full clean up. Check every time whether the color of the cartridge is getting cloudy or not after the cleaning. When it it tainted beyond repair is time to replace for a new one. Manufacturers recommend the replacement every two weeks but once again, you are the final judge. Consider also the quality of the water to judge the replacement. When the filters must be replaced, the water also must be replaced.


Adding enough salt to reach 2,000-3,000 ppm in your spa takes about 2 lbs. per 100 gallons of water. The mineral in the water raises the buffering capacity of the water to resist changes in pH, alkalinity and calcium hardness levels. The addition of salt increases the total dissolved solids of the water, making the water less aggressive and more resistant to water balance fluctuations.
This Coleman hot tub has a bright green outer layer with a white inner lining. It’s 77 inches in diameter and can seat 4-6 people although it is probably more comfortable with only 4. It can be set up in the garden or in the garage or basement wherever you want to place it as long as it’s a flat surface. All you need is the ability to plug it into an electrical outlet and be able to fill it with water and have a drain within reach when you have to empty it.
Heating the water up – One must keep in mind that a hot tub can take several hours to heat up depending on its construction and the technologies it employs. Please consider that the bigger the tub is the more it would take for the water inside it to heat up to the desired temperature. Furthermore, black hot tubs kept outdoors will likely draw more sunlight, thus causing the water they contain to heat up much faster.
When it comes to inflatable spas, there are many positive and negative considerations that you must take in mind. Factors such as your particular tastes, specific situation, and how/when the hot tub will be used will help you make the perfect decision on which one to purchase. The following are the pros and cons of an inflatable spa to weigh in on during the buying procedure.
One of the problems of this bath tub is the material that is used to manufacture it. As mentioned above, inflatable hot tubs are flexible and easy to carry but it is these same properties that make it vulnerable to various elements. Sharp edged objects lying around the house as well as elements in nature such as thorns and stones pose the risk of damaging the hot tub. Once the hot tub is perforated, there is almost no way of restoring it to its previous glory. Additionally, these bath tubs can only be utilized to a certain extent after which the wear and tear makes it necessary to look for a replacement. The disadvantage of owing an inflatable bath tub is that you have to take utmost care in protecting it from natural elements and climatic factors that might damage it.
Cover: if you spot a model that includes the cover, it is a plus, however don’t take the cover of an average model as an advantage just because it has a cover. They are quite important to keep your tub not only hotter for longer but also to protect the water from getting contaminated with sitting dust and any other contaminants from the air, from leaves to insects that may be really looking for water. Most brands that don’t include the cover sell it separately.
All wallpapers and backgrounds found here are believed to be in the “public domain”. Most of the images displayed are of unknown origin. We do not intend to infringe any legitimate intellectual right, artistic rights or copyright. If you are the rightful owner of any of the pictures/wallpapers posted here, and you do not want it to be displayed or if you require a suitable credit, then please CONTACT US and we will immediately do whatever is needed either for the image to be removed or provide credit where it is due.
Most of an inflatable hot tub system is automated, except for the water filling the set up of the tub pool. You have to find a special place where the tub can stay even on the floor, preferentially with a thermal insulating material, like wood surfaces or even on your lawn. To guarantee it will be well insulated, there is a floor cover that is included in the pack and must be laid before you set the tub parts to be inflated.All the inflation process happens through and automated pump. You just need to connect the tubes and turn it on. Often the inflatable hot tub is made of two parts: the bottom/outer part and the inner/pool side of the set. They both inflate at the same time but are just assembled together with a zipper or other kind of tying system – and this is really great for insulation and safety reasons.
Upgrade your home-based spa experience by purchasing some hot tub accessories. Customize it with fun add-ons like glass holders, headrests, benches, extra filter cartridges, and a lot more. These accessories are not included in a basic blow-up hot tub set, so you might want to splurge a little more. Because nothing screams “best inflatable hot tub” quite like the one with your personal touch on it.

First and foremost, you have to look for a model that has a quality construction. The durable construction is going to ensure that it will be a lasting investment, meaning that you won’t have to replace it for a long time. What we recommend is a tub like our top choice, the SaluSpa Hawaii HydroJet Pro that features polyester laminated PVC for the construction of the tub. Also, to figure out whether you are looking at a top quality model or not, you should search for the I-Beam technology feature as well because it shows increased stability, safety, and durability.

Be sure you have an adequate area to install the inflatable hot tub you are looking for before you hit the Buy button. Each model has its own guidelines when it comes to external and internal implementation, so if you are looking for a hot tub to enjoy the cold seasons on your own private thermal water be sure the model is resistant to thermal stress as some models really can’t endure temperature way too cold, like to freezing and snowy degrees. As we said before, the area on the ground where you will install the tub must be preferentially thermal insulating. Cold stone floors are not recommended, wood, lawn or even sand and preferential. For cold scenarios, the installation of the set is better over windbreakers like a fence or a wall.


Regardless, they do get the job done of relaxing you in a very luxurious way. Bubble Jets are installed at the bottom perimeter of the tub, to give you a soothing light massage. The water heater can raise the water’s temperature at a rate of 2 to 3 degrees per hour. There is also a built-in water filtration system to help maintain the water’s cleanliness.

It has enough room to sit 4 people according to the manufacturer. As with all other “4 person hot tubs”, get ready for some intimate time with your buddies. This is fine if you are close friends, but not so comfortable if you are not. The exterior layer is a brownish synthetic leather. It is a matter of personal preference, but we don’t like it at all.
Adding enough salt to reach 2,000-3,000 ppm in your spa takes about 2 lbs. per 100 gallons of water. The mineral in the water raises the buffering capacity of the water to resist changes in pH, alkalinity and calcium hardness levels. The addition of salt increases the total dissolved solids of the water, making the water less aggressive and more resistant to water balance fluctuations.
The more expensive of the two would definitely be portable, not only for the higher grade materials but also factoring in shipping weight. Portable hot tubs tend to weight more than 100 pounds and depending on where you want to put it may need special planning beforehand. This is because you have to factor in doorway size if you are putting it inside, and let’s not forget taking it up a flight of stairs. A lot of people opt to have a friend help, so there is a couple of bucks in that transaction as well-unless you have a really gracious friend that doesn’t mind helping you carry a 100+ pound hot tub with weird dimensions up a flight of stairs.
So in conclusion, we decided that even though we had some reservations when we first started looking at inflatable spas, we are glad we now own one. They have come along way, and they have features that we were looking for like economy and ease of maintenance. We feel that the pros outweigh the cons and an inflatable hot tub fits just right with our lifestyle and needs.
×