There is a safety function built in to this pump system which automatically goes into hibernation if no button is pressed in 72 hours. If you have the heater system setup on timer and you don’t actually use the hot tub and press a button for 3 days it will turn off meaning a long re-heat if you don’t notice. This is less of a problem if you use your hot tub daily, but if you are a weekend user this can be a pain if you forget to go out and press a button to let it know you’re still there.

The heater once turned on, heats up the water at a rate of 2 degrees per hour. You can set the temperature beforehand, leave it overnight or during the day while you’re at work, then come home and soak in your desired water temperature. As with other models, this Intex portable spa comes with an insulated cover to keep the water clean while not in use. The cover also helps to keep the heat in until the time you decide to soak.

Thanks to its low-profile design, this particular tub can be set up in just a matter of minutes. This being said, you will be surprised to find out that it can accommodate up to four adults at the same time despite its apparently lightweight construction. As far as features go, this inflatable hot tub comes with a Lay-Z massage system, both rapid-heating and water-filtration systems, and an easy to operate digital control panel to top it off. Overall, it is perhaps one of the most cost-effective inflatable hot tubs money can buy.


The focused jet of water under high pressure makes a unique massage experience therefore water jets can give you a much stronger and more direct massage than air jets. The water pump is less noisy than it’s air counterpart. No heat losses due to cold air being pushed into the water. Together with hot water, they are awesome for relieving sore muscles – check out this study.

Follow the instructions for inflation of the hot tub as you should not trespass the recommended PSI measure. For hot seasons this is quite important because the air will expand with heat, specially when the tub is set under the sun. Most pumps that are included with the hot tub include a gauge so you can check those measures. When you inflate too much the tub, pressure will start to damage the connections of the tub with jet heads, tubes and other orifices, and this will lead to leaks, so don’t overboard.


First of all, you must make sure that the pH and the alkalinity levels of the water are in check. This is a test that you have to do once per week using a water test kit that either comes with the tub or that you purchase separately from a specialty store. The target level that you should try to maintain is for the water to range in pH from 7.4 to 7.6. Anything higher or lower causes the degradation of the tub, damaging the material that it is constructed from.
It can accommodate a maximum of 4 people at once. It has a water capacity of 217 gallons, and the rapid heating system is able to raise the temperature of the water by 2-3°F per hour. The maximum heat capability that it features is of 103°F. It comes with 88 air jets that deliver a soothing massage. To ensure that the water in it will be of a great quality and safe to sit in, it features a useful water filtration system.
To help get a more accurate idea of how big the average inflatable hot tub is, firstly take a close look at the product image, make sure you like the look of what you see. Next you should closely consider the dimensions and the fact that what makes an inflatable spa well insulated are the thick walls of trapped air. These walls are on average around 10 inches thick.
The inflatable spa offers a number of desirable features. An inflation hose makes it easy to inflate your hot tub when you set it up, and a built-in hard water treatment system filters out calcium and other minerals for a more smooth, relaxing soak. The experience is further enhanced by 130 massaging jets which can be activated via the handy, easy-access control panel at the side of the hot tub.
It has enough room to sit 4 people according to the manufacturer. As with all other “4 person hot tubs”, get ready for some intimate time with your buddies. This is fine if you are close friends, but not so comfortable if you are not. The exterior layer is a brownish synthetic leather. It is a matter of personal preference, but we don’t like it at all.
This is the best $360 we've ever spent. We use it once or twice a day since we got it 2 months ago. So... it took about 15 hours to heat up to 104 degrees to start things off. To save money on electricity we turn it off after our last use for the day,,, around 5pm,, leaving only the water circulating on. Then when we get up 5/6am we turn the heater back on and it's ready to go at 104 degrees around 3pm that afternoon. Since I've never had a spa or pool before that I had to maintain chemical balances, that was a little confusing until we educated ourselves. There is an automatic run time clock on the unit but I've never taken the time to learn how to use it. Assembly,,, was easy but I wish I had a video to watch (I learned a lot ... full review
Usually costing around $4,000 to $9,000 depending on type and size and location to be installed. But going the inflatable spa way will run you around $500, with no setup costs. And if you will only be using it part of the year, you simply deflate it and store it away. There are no costs of maintaining it to keep it from looking like something that the creature from the black lagoon would like to hide out in. Oh, and did we mention, to heat it up and keep it heated will run around $8-$12 a month depending on your electricity prices per kWh.
×