The main issue against saltwater hot tubs is that salt causes corrosion. At levels of 2,000-3,000 ppm, there should be no worry about damage to finishes and pool equipment. There is one material in particular that doesn’t like salt, that being Buna rubber, which some pump shaft seals are made of. Again, at normal levels, there should be no concern. But if your pump seal begins to leak, we do have pump shaft seal made for high salt or ozone conditions.

Some manufacturers recommend the cleaning of the tubes system with an anti-clog solution. That requires you to fill in a little bit the tub with clean new water, pour the solution and turn on the jet system to make the water circulate in the whole system and let it take action for the recommended amount of time. This anti-clog cleanig must be performed with the new cartridges already set. Dump the water after the anti-clog cleaning and fill in with another portion of clean water, turn on the jets again to wash any remains of the solution.


Normal hot tubs can cost upwards of one or two thousand dollars before even including the cost of installation. This is what makes inflatable hot tubs more attractive to people on a budget. To save the most amount of money, however, you may need to give up a few extra perks, like massage jets and water filtration. Unless that is, you choose the Coleman SaluSpa.

Bathing is that sacrosanct activity that has historically been known to be much more than just cleaning oneself. The hygiene part aside, most people have confirmed that bathing is that time of the day when the mind feels relaxed and you get a lot of thinking done. Solutions to important problems and strategies to enhance your activities are most likely to present themselves to you at such relaxed junctures. So when you engage in such an important activity, it is important to use the right methods. Here are a list of pros and cons of bathing in inflatable hot tubs.
The 28409E PureSpa Plus Bubble Spa is perfect for use both indoors and outdoors. It features the I-Beam technology, and the tub is made of 3-ply laminated PVC. It boasts a generous 6 person seating capacity. The 290-gallon water capacity and the 460 gallons per hour flow rate show that this is a high-end tub that delivers nothing but quality to those who use it.

Once the set is fully inflated, you have to fill it in on your own, making use of a garden hose for example. When the tub is ready to use, you can adjust how much hot you want the water to be and for how long you want it to keep heating. The same goes for the jet heads functioning, all can be adjusted and timed by digital controlling. The main difference between the system of an inflatable and a traditional hot tub is the disposition of the motor/engine that filters, heats and blows water and air. On traditional tubs it will be placed built-in, while on the inflatable one it is a sided appliance.


In addition to lower upfront costs, inflatable tubs also boast higher energy efficiency than their fitted counterparts. This is important to the customer because it translates into a spa that costs less to operate. Inflatable models utilize just a single blower and pump, which makes them cost up to fifty percent less to run. These savings go even further when you consider the fact that an inflatable tub is typically only hooked up and running when you are wanting to use it, instead of connected around the clock like a fitted tub. Adding to the cost savings is the low maintenance requirements of inflatable hot tubs.
The 28409E PureSpa Plus Bubble Spa is perfect for use both indoors and outdoors. It features the I-Beam technology, and the tub is made of 3-ply laminated PVC. It boasts a generous 6 person seating capacity. The 290-gallon water capacity and the 460 gallons per hour flow rate show that this is a high-end tub that delivers nothing but quality to those who use it.

If you really want to have fun, you must definitely try the Paris with an entertaining LED lights show that will surely bring a fresh air to your yard. The tub itself is made of a high-quality and durable material similar to leather that boasts the innovative TriTech triple reinforced structure. This consists of a polyester mesh core wrapped in two layers of PVC that ensure a robust and sturdy construction.


If you do like to move it around regularly, which is the strongest advantage for inflatable hot tubs, you have to deal with draining, deflating, moving, inflating, and refilling your tub every time you want to move it. The deflating and inflating isn’t as big of a deal if you have an air compressor to hook up to it, or if your hot tub came with its own, but it still takes a while (and a good deal of water) to refill that hot tub every time, and longer yet to get the water hot.
×